Keysight N5991 SATA Test Automation Software Platform User Guide
13
ValiFrame SATA Station
2
Error Detector
The error detector checks if the data looped back from the DUT (Device
Under Test) contains errors. It can be selected as:
• JBERT M8020A
• JBERT M8040A
• Custom DLL
BIST Control
The BIST control moves the DUT into loopback mode to perform the tests.
This option can be selected as:
• Automated
• Manual
• Custom DLL
Power Switch
This power switch has such options to be selected as:
• Manual
• NetIo230B
• ALL4076
• SynaccessNP
If it is chosen as Manual, the user needs to power cycle the DUT manually
and the options for Power Switch Automation such as Channel, Off-On
Delay, and Settling Time are disabled by default. For the other options, the
Power Switch Automation is enabled to select the related parameters and
the DUT is power cycled automatically.
Содержание N5991ST3A SATA
