Keysight Technologies N5261A Скачать руководство пользователя страница 95

Страница: 95 / 99

Regulatory Information

This section contains information that is required by various government regulatory

agencies.

Instrument Markings

The instruction documentation symbol. The product is marked with this symbol when it is

necessary for the user to refer to the instructions in the documentation.

The AC symbol indicates the required nature of the line module input power.

This symbol indicates separate collection for electrical and electronic equipment, mandated

under EU law as of August 13, 2005. All electric and electronic equipment are required to be

separated from normal waste for disposal (Reference WEEE Directive, 2002/96/EC).

This symbol indicates that the power line switch is ON.

This symbol indicates that the power line switch is in the STANDBY position.

This symbol indicates that the power line switch is in the OFF position.

This symbol is used to identify a terminal which is internally connected to the product frame

or chassis.

The CE mark is a registered trademark of the European Community. (If accompanied by a

year, it is when the design was proven.)

The CSA mark is a registered trademark of the CSA International.

This mark designates the product is an Industrial Scientific and Medical Group 1 Class A

product (reference CISPR 11, Clause 5)
This is a marking to indicate product compliance with the Canadian Interference-Causing

Equipment Standard (ICES-001).

Direct Current.

IP 2 0

The instrument has been designed to meet the requirements of IP 2 0 for egress and

operational environment.

The RCM mark is a registered trademark of the Australian Communications and Media

Authority

Indicates the time period during which no hazardous or toxic substance elements are

expected to leak or deteriorate during normal use. Forty years is the expected useful life of

the product.

This symbol on all primary and secondary packaging indicates compliance to China

standard GB 18455-2001.

South Korean Certification (KC) mark; includes the marking's identifier code which follows

the format: MSIP-REM-YYY-ZZZZZZZZZZZZZZ.

ICES/NMB-001

Keysight N5261/62A User’s & Service Guide

Содержание N5261A




































































































Результаты поиска

Содержание N5261A

Отзывы:

Бренды по названию

Популярные бренды

Keysight Technologies N5261A, Руководство пользователя и сервисное руководство

Результаты поиска

Содержание N5261A

Отзывы:

Бренды по названию

Популярные бренды