34 Installation Note N5242-90003
Description of the Upgrade
Installation Procedure for the Upgrade
-
Step 17. Position the Cables and Wires to Prevent Pinching
On the top side of the PNA, carefully position the grey flex cables so they can’t
be pinched between the covers and the rails.
On the bottom side of the PNA, carefully fold or push down the ribbon cables
and wires so they can’t be pinched between the hardware and the outer cover.
Ribbon cables and wires must never be positioned on top of hardware.
Step 18. Reinstall the Inner Cover
Refer to
for this step of the procedure.
1.
Position the inner cover on the analyzer.
2.
With a T-10 TORX driver, install the 12 pan head screws (item
①
).
3.
With a T-10 TORX driver, install the 9 flat head screws (item
➁
).
