Getting Started Guide 71
Front and Rear Panel Functions
Rear Panel Features
15
SPM Triggers
TRG1: time-based triggers: immediate, based on system counter, based on
technology counters.
TRG2: gating signals.
TRG3 and TRG4: time-based triggers: immediate, based on system counter,
based on technology counters.
You can define any trigger connector (from TRG1 to TRG4) to be of any kind of
trigger or you can define it as unused.
16
SPM-B (bottom)
The connectors of these modules are for factory use only. Do not remove.
17
PPM-B
The connectors of these modules are for factory use only. Do not remove.
a. When you are setting up multiple UXMs for testing purposes, the Internal Applications Server must be installed
on the Main UXM (not the Auxiliary UXM) in order for all functions to work properly.
b. Do not modify any LAN connections or IP configurations while the test application is running.
c. Do not modify connections to the internal and/or external references while cells are active on a test application.
Do not cover or block the air flow vents. The test set draws air in from the left
side and exhausts air from the right side.
The main power cord can be used as the system disconnecting device. It
disconnects the mains circuits from the mains supply.
Number
Item Name
Description
