Keysight Technologies E7515A Скачать руководство пользователя страница 98

Страница: 98 / 109

98 Getting Started Guide

Internal Application Server Operating System
System Maintenance

Hard Drive Partitioning and Use

The drive is partitioned into 3 sections: C:, D: and E:

— The

partition contains the Windows 7 operating system and software

installed by Keysight. This is an Open System which means you can install

additional software.

— The

partition is reserved for data storage. The User Accounts that are

configured by Keysight have their Users folder mapped to the D: drive. This

is for the convenience of backing-up the test set measurement data. You

should always back-up the data on the D: drive to an external device. This

enables you to restore the data should the hard drive need to be replaced.e

— The

partition is reserved for Keysight’s use. The primary use of the E:

drive is for storing the Calibration and Alignment data, the configuration

files for the Platform Boards and Host PC. Do not change or overwrite the

files on this drive. This could cause your instrument to not meet

specifications, or even to stop functioning correctly. Do not use this drive

for data storage. It is also recommended that you back-up the contents of

this drive by using an external device.

Disk Drive Recovery Process

The Instrument Image Recovery System can be used to repair errors on the

Internal Applications Server's C: drive or to restore the original factory

configuration of the system software. Repairing errors on the hard disk drive

may result in loss of data or files. If you need more information about the

Windows "chkdsk" error repair process, see the chkdsk documentation in the

Microsoft Windows 7 Help and Support Center. Restoring the original factory

system software does not restore any of the following items:

— Windows system configurations that were made after the instrument was

shipped from the factory. For example, Windows and Service Pack updates,

user accounts, and windows configuration settings. After an Instrument

Image Recovery System, these configurations need to be redone.

— Additional software that was installed after the instrument was shipped

from the factory. After an Instrument Image Recovery System, that software

needs to be re-installed.

Data on the desktop will be deleted during system recovery. Therefore it is

recommended that you always store your data in another folder on the D: drive,

for example

D:\Users\Instrument\Documents

Содержание E7515A














































































































Результаты поиска

Содержание E7515A

Отзывы:

Похожие инструкции для E7515A

Бренды по названию

Популярные бренды

Keysight Technologies E7515A, Руководство по началу работы

Результаты поиска

Содержание E7515A

Отзывы:

Похожие инструкции для E7515A

Бренды по названию

Популярные бренды