92 Getting Started Guide
Test Set Operating System
Updating the Keysight E7515A NB-IoT Application
Installing the Keysight NB-IoT Application
Once the NB-IoT Application software has been installed, you must follow the
instructions provided in the E7515A User's and Programmer's Guide in order to
install the license required (if not previously installed), and select and start up
the NB-IoT Application, using the Application Manager.
Step
Notes
1.
If you have just completed uninstalling the
Keysight E7515A NB_IoT Application, then you
may be able to skip steps 2 through 4, below.
2.
Connect a USB keyboard and mouse to the
instrument.
3.
Log out of the default user (instrument):
Select
Start
,
Log Off
.
4.
At the log in prompt enter:
User Name:
administrator
Password:
Keysight4u!
5.
Confirm that Keysight E7515 UXM software is
installed and its version is 1.7.1.0 or later.
Select
Start
,
Control Panel
,
All Control
Panel Items
,
Programs and Features
.
Find
Keysight E7515A UXM
.
If the Keysight E7515A UXM version is earlier than 1.7.1.0,
see
“Updating the Keysight E7515A UXM
for information on how to install
a later compatible software version.
6.
Obtain the latest version of software installer.
Download it from the site:
www.keysight.com/find/softwaremanager
7.
Locate the software installer program obtained
in the step above.
8.
Follow the on-screen prompts to continue the
installation.
The installation process takes about 2 minutes. Do not turn
the instrument power off or serious damage may occur. If
any pop-up windows appear, click OK or Ignore to proceed.
9.
When the installation has finished, you must
manually launch the UXM Control Panel (from
Desktop
or
Windows > Start
).
10.
Verify the UXM is operational.
If the Control Panel shows a Faulty state, restart the UXM or
power cycle the UXM as follows:
a. Power off the UXM and disconnect the power cord for 15
seconds.
b. Power on the UXM.
