Getting Started Guide 35
Quick Start
LAN Address Configuration
LAN Address Configuration
The UXM has two network interface cards (NICs) that connect the instrument
Host PC (embedded PC module) to external LAN outputs. If you ordered the
E7515A-S01, you also have a separate PC (Server PC) installed in the top-right
slot of the rear panel. This PC also has two external LAN outputs (see
5, “Front and Rear Panel Functions”, on page 63
). Both static and dynamic IP
address assignments are supported.
If your site network supports Dynamic Host Configuration Protocol (DHCP),
these front and rear LAN ports are assigned IP addresses automatically when
they are connected to the LAN (provided you have checked the DHCP box
when you configured the LAN port, using the interface illustrated below).
In order to identify or change these external LAN port IP addresses configured
in your UXM, it is best to use the Config button on the E7515A Control Panel.
Figure 2-1
LAN Address Configuration
Use
only
the control panel to set/identify the LAN IP addresses for
communication with external PCs and/or DUTs.
