background image

KEY DIGITAL 

 

HD LEEZA, MODEL KD-HD1080P 

 

 

HD Leeza Operating Instruction Manual 

 

Page 2 

 
 
 
 
Q: Why do I need
 a Video Processor? 

 

A: Problem: 

 

You have a “standard definition” DVD movie you want to watch on your high-resolution 
display

 

Key Digital has the Solution for you: 

 

Scale your input and adjust the video with your HD Leeza Video Processor 

  

 

SD Source 

 

DVD 

Player 

 

HDTV 

Display

 

 
 
 
 

 
 
 

 

 
Q: But what if my DVD player or even my display already has
 a Scaler? 

 

A: 

Turn it OFF and use HD Leeza instead, because HD Leeza has a very high quality built-in 
scaler called “Clear Matrix Pro” which takes all the different input formats and lights up your 
display in the best way:

 

 

 

The scaler in your DVD player can’t match the quality of HD Leeza, so turn it 

Off

 (use 480 

interlaced out) and let HD Leeza perform the video scaling 

 

The scaler in your display also can’t match the quality of HD Leeza, so be sure to use the 
“Native Resolution” or preferred settings for your display that are provided by Key Digital in 
the HD Leeza Display Matrix (available on our web site, or contact

 [email protected]

 

 

Scale your input and adjust the video with your HD Leeza Video Processor 

 

HD Leeza uses a Key Digital System’s proprietary “Clear Matrix Pro” Advanced Motion Assisted Scaling De-
Interlacing Algorithm with film detection inverse 3:2 pulldown detection processing for 60Hz and 72 Hz rates, and 
(PAL) 2:2 telecine pulldown processing and detection for 75Hz and 50Hz rates, making it the ultimate ”digital 
backbone” for home theater conversion today.  

 

 

Содержание HD Leeza KD-HD1080P

























































Отзывы: