Key Digital HD Leeza KD-HD1080P, Руководство по эксплуатации

Страница: 22 / 56

KEY DIGITAL HD LEEZA, MODEL KD-HD1080P
HD Leeza Operating Instruction Manual Page 15
HD Leeza Hot Buttons
R1 - Inhibit OSD Hot Button:
R1 is a hot button used in conjunction with the numbers 1 and 2. (R1, 2) is the default setting.
•
(R1, 1) puts HD Leeza in a mode where the OSD is not displayed when the input channel is
changed.
•
(R1, 2) restores the default mode where OSD is displayed on channel changes.
R2 - Separate Sync on SDI Hot Button :
R2 is a hot button used in conjunction with the numbers 1 and 2. (R2, 2) is the default setting.
•
(R2, 1) enables separate sync on SDI inputs. Then the frame can be moved horizontally and
vertically, exactly as with other input channels.
•
With (R2, 2), SDI inputs use embedded sync and cannot be moved on the display screen.
R4 - RGBHV Bypass Hot Button:
R4 is a hot button working as a RGBHV bypass switch. It connects the input RGBHV to the output
RGBHV, bypassing HD Leeza processing.
R6 - Direct Input Access Hot Button:
You can select any of HD Leeza’s inputs directly by first pressing the R6 button and then the desired
input number, as follows:
•
0 = DVI Input #1
•
1 = DVI Input #2
•
2 = RGBHV Input
•
3 = Component HD Input
•
4 = Serial Digital Input
•
5 = Component SD Input
•
6 = S-Video Input #1
•
7 = S-Video Input #2*
•
8 = Composite Video Input #1
•
9 = Composite Video Input #2*
* If there is no video source connected to the selected input, its front panel LED will blink (except for Composite
Video #2 and S-Video #2 inputs, and the words "No Signal" will also appear on screen).
NEW FEATURE FOR VERSION 5.5.55 AND HIGHER (more recent) OF THE FIRMWARE
Single digit Direct Access Input Switch:
The input can be switched as usual using (R6, #) as well as new Single key #. The single key mode is
activated once ALL OSD is automatically erased from the screen following 60 seconds of remote-control
inactivity. The single key mode will also activate after the user presses the PP button (at most) 6 times –
effectively erasing all OSD. The single key direct access works the same way as (R6, #} or as theRS232
command (i, #). It switches and plugs individual memories without displaying any OSD.