Key Digital HD Leeza KD-HD1080P, Руководство по эксплуатации

Страница: 21 / 56

KEY DIGITAL HD LEEZA, MODEL KD-HD1080P
HD Leeza Operating Instruction Manual Page 14
HD Leeza Remote Control Operation: SPECIAL FUNCTIONS
Granny Button (GB):
This button restores the factory default settings, and is used when you have made an incorrect adjustment
and can no longer see any menu or image on the screen (this could be the result of selecting an output
resolution or refresh rate incompatible with your Display). If this happens, simply hold down the green
GB button for five seconds, then press the right arrow button. HD Leeza will reset itself automatically to
640x480 output resolution with negative sync and RGBHV format. Other default settings after GB
reset: R1,2; R2,2; R7,2; R8,3; R8,9.
NEW FEATURE FOR VERSION 5.5.55 AND HIGHER (MORE RECENT) OF THE FIRMWARE
The user can choose to come up with RGBHV or YPbPr output during GB reset:
Since you may install HD Leeza in a configuration with a Component (YPbPr) or RGBHV display, you
need to be able to instruct HD Leeza to output in the correct format in order to see the OSD on your
target display.
Press the Granny Button for five seconds, followed by :
•
Right Arrow will furnish RGB output
•
Up or Down Arrows will set HD Leeza to YPbPr output with H and V still active. The
RGBHV and DVI monitor will still work with YPbPrHV but will show a strange green color.
The unit can be changed back to RGBHV through the System Setting Menu. Please
remember: only three standard YPbPr resolutions will be accepted by any component
monitor: 720x480p/60, 1920x540p/60 (this is instead of 1080i format) and 1280x720p/60.
Other resolutions are not standard for Component connection.
External 12V Control:
This function provides 12 Volts to operate compatible AV equipment, such as motorized projection
screens. You can turn on this function from position #6 on the main menu. Connect your compatible
remote AV devices and the 12 Volt source through the 1/8" mini phone jacks on the rear of HD Leeza.
Hot Buttons:
These buttons on the HD Leeza remote will take you directly to specific menu adjustments,
including AR-IN, SR, PA, ZO, SAT, CO, and BR (see call-outs on previous pages).
Please note: Usage of R-related double key Hot Buttons [such as R1 (IOSD, Inhibit OSD), R2
(SSSDI, Separate Sync for SDI), R6 (Direct Access), R7 (aggressive DVI), R8 (DVI phase)] require
that you wait 3 seconds after pressing R#, before pressing the ensuing command #. However, if you
do not make a subsequent # key-press within 60 seconds of pressing any R# button, the selected hot
key choice mode will time-out.