Key Digital HD Leeza KD-HD1080P, Руководство по эксплуатации

Страница: 23 / 56

KEY DIGITAL HD LEEZA, MODEL KD-HD1080P
HD Leeza Operating Instruction Manual Page 16
R7 – RGB/DVI Display Hot Button:
R7 is a hot button used together with the numbers 1, 2, or 3. (R7, 1) is the default setting.
•
With the (R7, 1) setting, the horizontal and vertical positions are zeroed out before being moved
to their normal values. This enables DVI displays to center the frame correctly. For RGB display
outputs, (R7, 1) is the best setting. With (R7, 1), the extra operations needed for DVI displays are
eliminated resulting in faster response.
•
(R7, 2) adds a sync-polarity “flip-flop” following (R7, 1) operation.
R8 - Direct DVI Phase Clock Configuration Hot Button:
You can manually configure the DVI phase clock for DVI output (direct DVI phase clock configuration
may be necessary if your Display does not sync up when output resolutions at 1280x1024/75 Hz and
higher are selected). This is done by pressing the
R8 button and then entering the desired number, as
follows:
•
0 = Phase 0
•
1 = Phase 1
•
2 = Phase 2
•
3 = Phase 3 (factory default)
•
4 = Phase 4
•
5 = Phase 5
•
6 = Phase 6
•
7 = Phase 7
Note: You will not see an adjustment menu on your Display when setting this configuration.
Special X or N DVI Input/Output Mode:
The remote commands (R8, 8) and (R8, 9) can be used to select a special X or N DVI input/output mode
respectively. Stick with the default DVI_PH_N (R8,9) if you have no issues with DVI input/output.