Key Digital HD Leeza KD-HD1080P, Руководство по эксплуатации

Страница: 25 / 56

KEY DIGITAL HD LEEZA, MODEL KD-HD1080P
HD Leeza Operating Instruction Manual Page 18
The factory default output setting for HD Leeza is 720x480, with composite video input #1 selected.
You will need to set HD Leeza for your particular configuration of Input and Output (display) devices.
-
HD1080P
If you own a DVD player or DTV set-top receiver equipped with serial digital interface (SDI) or digital
visual interface (DVI), use either connection for an all-digital, high-quality signal path to HD Leeza. The
next step is to determine the native pixel count of your Display. This is typically described in the
Specifications section of your owner's manual. The resolution will be expressed as a ratio of horizontal
to vertical pixels, such as 1280x768 or 800x600.
**We highly recommend you refer to the DISPLAY MATRIX – PREFERRED HD LEEZA
RESOLUTION SETTINGS FOR POPULAR DISPLAYS at the end of this manual, to find the best
RESOLUTION setting (the “Sweet Spot”) to select for HD Leeza, for your display connected to the
output of HD Leeza.
Turn on HD Leeza and your display. Make sure your display is set to the input where you have
connected HD Leeza. Using the supplied IR Remote Control, select the input on Leeza where you have
connected your video source. Press the
Menu button and scroll to either the HD Input or SD Input sub-
menu. Composite, S-Video, component SD, and serial digital inputs will appear under SD Input , while
component HD, RGB, and DVI inputs will appear under HD Input . Scroll right to select the desired
input source. After you make this selection, scroll left to return to the main menu. Highlight selection
#5,
Resolution . Then, scroll right. A second menu will appear with a list of output resolution options.
Scroll up or down through the list until you find the output resolution that matches your Display. If you
don't see the desired output resolution, highlight and select
More for more choices. Once the desired
output resolution is highlighted, scroll right button once more. A third menu will appear with five
different picture refresh rate selections from 48 Hz to 75 Hz. Match this selection to the optimum refresh
rate of your Display. If you are not sure which selection to make here, choose the default setting of 60
Hz by scrolling right once more.
IF YOU SELECT A RESOLUTION THAT YOUR DISPLAY DOES NOT SUPPORT, you will
lose the OSD, and be unable to navigate:
• SIMPLY RESET HD LEEZA TO THE FACTORY DEFAULT SETTINGS AND START OVER.
• THE “GB” Button (“Granny Button”) resets all settings to the safe factory default (RGB,
720x480/60)
•
Hold down the GB button for 5 seconds, then press the Right-arrow button to invoke the reset.
Your selected output image resolution and picture refresh rate are now activated. The onscreen menus
can be cleared simply by pressing the
Menu key once more, and you can begin watching high-quality
video from any of your connected sources by pressing the Input Select key on the remote control to
choose among them.