Kettler Famili ano C-N, Перевод оригинальной инструкции по эксплуатации

Страница: 75 / 102

MY21K03 - 12_1.0_22.09.2020
75
Troubleshooting, fault clearance and repair
9.2 Repair
Special knowledge and tools are required for
many repairs. That is why only a specialist dealer
may perform repairs such as:
• Replacing tyres and rims
• Replacing rims and brake linings or brake discs
• Replacing and tensioning the chain
9.2.1 Original parts and lubricants
The individual pedelec parts have been carefully
selected and matched to one other.

Only original parts and lubricants must be used
for maintenance and repair.

The constantly updated accessory approval
and parts lists are in Section 11, Documents
and Drawings.
 Follow the operating instructions for the new
components.
9.2.2 Replacing the lighting
 Only use components of the respective power
class for replacement.
9.2.3 Adjusting the headlight
 The headlight must be set, so that its light beam
shines on the road 10 m in front of the pedelec.
Three beeps are sounded.
A fault or warning has occurred. This
occurs when an error message is
displayed.

Follow the instructions for the code indicated on
the display screen in Section 6.2 System
Messages.
When you use an electronic gear shift,
you can feel that pedal assistance
becomes weaker when the gear is
changed.
This is because the on-board computer
sets the pedal assistance to the
optimum level.

This is not a malfunction.
A noise can be heard after switching.

Contact your specialist dealer.
It is normal to hear a noise coming from
the rear wheel when cycling as normal.
The gear shift setting may not have
been made properly.

Contact your specialist dealer.
If the pedelec stops, gear transmission
does not switch to the position pre-
configured in the functional feature.
You may have applied too much
pressure on the pedals.

It is easier to change gears if you press onto the
pedals gently.
Symptom Cause Remedy
Table 34: Error solution for battery