Kett LZ-990, Руководство по эксплуатации

Страница: 16 / 44

16
1
Application
Total of 16 applications (calibration curves) – 8 for
Electromagnetic and 8 for Eddy-Current can be set.
(1) Follow the steps on p. 15 (1), (2).
(2) Select an application (channel) number by ,
or , keys, and press key. Application is
fixed and display returns to measuring mode. In case
of right diagram, Fe 05 application is fixed.
* 00-07 is selectable for Electromagnetic method application.
* 08-15 is selectable for Eddy-Current method application.
* Once the application number is set, it will remain in the memory until
reset again, even if the power is switched off.
(3) If you choose not to change application number,
select Esc by or keys, and press key.
Display returns to measuring mode.