Kessler-Ellis Products INTELLECT-69PM2, Инструкция по установке и эксплуатации

Страница: 10 / 22

6
out hi
- OUT HIGH; The displayed value (-9999 to 49999) at which the unit will output 20 mA (100
°
= 20 mA out).
BAUD
- BAUD RATE; The baud rate at which the RS232 or RS422 communications will operate.
9600
- 9600 BAUD; This sets the communications at 9600 Baud.
2400
- 2400 BAUD; This sets the communications at 2400 Baud.
1200
- 1200 BAUD; This sets the communications at 1200 Baud.
300
- 300 BAUD; This sets the communications at 300 Baud.
UNIT
- UNIT NUMBER; This assigns the unit an ID number from 1 to 99. This number is to be addressed when the unit is
to be on line. A unit with 0 assigned will never come on line.
P LIST
- PRINT LIST; This sets a list of data that will be transmitted whenever the strobe is activated.
RATE
- RATE; When this is added to the print list, the unit will transmit the present process value when the strobe is
activated.
PEAK
- PEAK; When this is added to the print list, the unit will transmit the present peak value when the strobe is acti-
vated.
UALLEY
- VALLEY; When this is added to the print list, the unit will transmit the present valley value when the strobe is
activated.
PRE A
- PRESET A; When this is added to the print list, the unit will transmit the Preset A value when the strobe is acti-
vated.
PRE B
- PRESET B; When this is added to the print list, the unit will transmit the Preset B value when the strobe is acti-
vated.
END
- END; This is the only exit from the P List. If END is not entered the unit will start at the beginning of the P List again.
P
##### - P; This will appear in the 6th (furthest to the left) digit when viewing the Peak. The peak value is the highest
reading that the unit had displayed since the peak had been reset. The peak is not retained in memory when
power is lost.
U
##### - U; This will appear in the 6th (furthest to the left) digit when viewing the Valley. The valley value is the lowest
reading that the unit had displayed since the valley had been reset. The valley is not retained in memory when
power is lost.