Kessler-Ellis Products INTELLECT-69PM2, Инструкция по установке и эксплуатации

Страница: 12 / 22

8
This section of the menu is used to set
up the lockout type and code.
LC PG = Locks program but presets
are accessable.
LC ALL= Locks program & presets.
Press the PRGM button to toggle be-
tween choices; Press RST/ENTER to
enter displayed choice.
When CODE is displayed, press any
key to view existing lock code. To
change the code press the key under
each digit to be changed. Press RST/
ENTER to enter displayed value.
INPUT
RELAYS
LOC
LC PG
or
LC ALL
CODE
Press any key to view
or change the lock
code
PRGM
PRGM
PRGM
ENTER
ENTER
INPUT
RELAYS
HYS A
(hit any key to view or
change existing HyS A
value XXXXX)
HYS B
PRGM
PRGM
ENTER
This section of the menu sets up the
open collector outputs and/or relays.
Hys (hysteresis)= The number of units
below the preset that the output will
remain "ON". EXAMPLE: Preset set
@ 100; HyS set @ 10. Output will
activate (turn on) when display = 100
and turn off when display falls below 90
(10 below preset).
Follow instructions for hys A
ENTER
STEP
3
STEP
2
SETTING
LOCK
SETTING
RELAYS
REMARKS
This section of the menu is used to set
up the type of signal the unit will be
receiving.
Press the PRGM key to step through
choices. Press the RST/ENTER key
to enter the displayed choice.
DISPLAY
INPUT
I 4-20, E 1-5,
E 0-5
or
E 0-10*
PRESS
*
0-20 mA available by using 0-10 V setting and current (I) input pin 4
PRGM
ENTER
STEP
1
SETTING
INPUT
PROGRAMMING