Kessel 010-694, Инструкции по установке, эксплуатации и техническому обслуживанию

Страница: 66 / 264

66 / 264
Installation
03/2015
Maintenance interval
• Select the maintenance interval you require or enter accordingly and confirm with OK, the menu System
information appears, initialisation is complete.
3.9.2 Setting up the KESSEL tele-control modem for fault messages
(Option) In menu item 3.9, it is possible to define which incidents of the backwater lifting station are to be sent to
which text message recipient.
3.9.3 Adapting the switching points for air bubble formation
(Option) If a small compressor for air bubble formation is installed, it must be adapted as follows:
• Make sure that the system tank is full.
• Switch the small compressor off.
• Switch the backwater lifting station on.
• Note the measured value displayed in operating menu 1.5.3.
• Switch the small compressor on.
• Determine the offset value, to do this subtract the measured value now displayed in operating menu 1.5.3
from the measured value you noted before.
• Enter the offset value in operating menu 3.1.8 air bubble formation offset, the switching values have now
been adapted.
3.9.4 Functional check
Carry out the functional check in accordance with the activities listed on the maintenance card (see 6.2.1).