Kessel 010-694, Инструкции по установке, эксплуатации и техническому обслуживанию

Страница: 59 / 264

Installation
59 / 264 03/2015
3.5 Installing the optical probe on the backwater flap(s)
Depending on the model type, there are either one or two optical probes for backwater detection included in the
scope of delivery.
These are fitted as follows:
Cable marking Function
none Backwater flap
yellow Redundant valve
Fitting the probe for the backwater flap
• Fix the optical probe <1> to backwater flap <A and optionally B>, to
do this:
• Remove the sealing cap <46>.
• Use the sealing cap screws to fit the optical probe.
Fitting the probe for the redundant valve
• Fix the optical probe <1> to backwater flap <A and optionally B>, to
do this:
• Unscrew the screws on the sealing cap <46> and remove the
sealing cap.
• Insert the adapter <47>.
• Use the sealing cap screws to fit the optical probe.
Abb. [31]
47
Abb. [32]