background image

Model Number:

 3MO160, 3MO180, 3MO168, 

3MO160-WD, 3MO180-WD

Warnings and Notes:

Check with local plumbing code requirements before installation.

This product should be installed by a local listed plumber.

Do not use plumbers putty on threads.

Installation Steps:

Single Handle Lavatory Faucet

(1) Shut off water supplies. Remove old faucet. 

Clean mounting surface in preparation for new 

faucet.

(2a)

 For 1-Hole Installation

:- Install mounting 

bolt. 

For 3MO168 :- 

Install mounting bolt.  Place 8” 

extension and align it.

For Both

:- Place escutcheon with gasket 

under the faucet then place faucet in position 

on the sink. Slide mounding washer and 

mounting plate through mounting bolt from 

underneath of the sink, tighten locknut to 

mounting bolt.

(2b)

 For 3-Hole Installation

:- Install mounting 

bolt. Place deck plate with gasket under the 

faucet then place faucet in position on the 

sink. Slide mounding washer and mounting 

plate through mounting bolt from underneath 

of the sink, tighten locknut to mounting bolt.

(3) Connect hot and cold inlet supply hoses 

to supply stops.  For 1/2” connection; use 3/8” 

male to 1/2” female adapter for installation.  

Adapters are optional and not provided with 

the faucet.

(4) Important: After installation is complete, 

remove aerator.  Turn water supplies on and 

allow both hot and cold water to run at least 

one minute each.  While water is running, 

check for leaks.  Turn off water and replace 

aerator.

Pop-up Drain Installation:

PIONEER INDUSTRIES, INC. 

3325 S. Garfield Ave.

Commerce, CA 90040
(800) 338-9468 
www.pioneerind.com

INSTALLATION 

Tools:

Adjustable Wrench Plumbers Putty

Teflon Tape

Rags

(1) Remove pop-up flange from body 

(2) Place a ring of putty on the bottom of 

flange. 

(3) Insert pop-up flange through drain hole 

and attach fIange to body. Ensure the pop-up 

outlet faces towards the back of the slnk 

Tíghten the locknut securely with a wrench Do 

not overtighten.

(5) Remove pivot rod nut from pop-up body, 

ensure the washers is in place, insert pivot 

rod, tighten pivot rod nut back to pop-up body.

(4) Remove the excess putty. Connect the 

trap (check manufacturer’s instructions for 

ínstallation) 

Содержание 3MO160

Страница 1: ...f the sink tighten locknut to mounting bolt 3 Connect hot and cold inlet supply hoses to supply stops For 1 2 connection use 3 8 male to 1 2 female adapter for installation Adapters are optional and not provided with the faucet 4 Important After installation is complete remove aerator Turn water supplies on and allow both hot and cold water to run at least one minute each While water is running ch...

Страница 2: ...00029 Pop Up Drain Assembly I X 4300087 Deck Plate For 3MO160 WD 1 X 4900044 Hole Cover 2 X 4400099 Allen Screw 6 Push pivot rod down insert drain plug carefully Test to ensure drain plug works properly 7 Connect lift rod strap to pivot rod by using clip Tighten the thumbscrew to connect lift rod strap to pop up lift rod For more care information or trouble shooting inquiries about your Pioneer pr...

Страница 3: ... X 4300088 Cap E X 1300019 Metal Lever Handle F X 4300091 Escutcheon and Washer G X 5300012 Mounting Kit H X 6300029 Pop Up Drain Assembly I X 4300087 Deck Plate For 3MO180 WD 1 X 4900044 Hole Cover 2 X 4400099 Allen Screw For more care information or trouble shooting inquiries about your Pioneer product please call Pioneer Industries Inc 800 338 9468 8AM 8PM EST 5AM to 5PM PST www pioneerind com ...

Страница 4: ...0089 Locknut D X 3300006 Ceramic Disc Cartridge E X 4300090 1 5 GPM Aerator F X 4300091 Escutcheon and Washer G X 5300008 Mounting Kit 1 X 4900044 Hole Cover 2 X 4400099 Allen Screw For more care information or trouble shooting inquiries about your Pioneer product please call Pioneer Industries Inc 800 338 9468 8AM 8PM EST 5AM to 5PM PST www pioneerind com ...

Отзывы: