background image

Safety 

3  Safety instructions for attachments 

The most important safety instructions in this manual cannot cover all possibilities. It goes 
without saying that common sense and caution are factors that are not built into a machine but 
must be brought by the person who uses and maintains the machine. 

In order to keep the accident risk as low as possible, please observe the following 
subchapters. 

3.1  Intended use 

The sweeper has been developed for sweeping on paved surfaces, sidewalks and facilities for
the usual or common use in the area of area care.

Any other use is considered improper use. The manufacturer is not liable for damage resulting
from this, the risk being solely borne by the operator.

Proper use also includes compliance with the operating, maintenance and service conditions
specified by the manufacturer.

The attachment may only be used, maintained and repaired by persons who are familiar with it
and have been informed of the dangers.

The relevant accident prevention regulations as well as the other generally recognized safety
and occupational health rules must be observed.

Unauthorized modifications to the machine lead to the exclusion of liability of the manufacturer
for the resulting damage.

3.2  General safety and accident prevention regulations 

3.2.1  Basic rules 

In addition to the instructions in this operating manual, observe the general valid safety and accident
prevention regulations!

The implement may not be used by persons under the age of 16, not even under the supervision of a
Adults be served! Children and adolescents should be instructed not to play with it.

Only trained personnel or persons may use this machine!

When using public traffic routes, observe the relevant regulations!

The clothing of the user should be tight. Avoid loose-fitting clothing and wear sturdy shoes or safety
shoes!

Only work in good visibility and light conditions!

The attached warning and information signs provide important information for safe operation; the
attention serves your safety!

Beware of rotating sweeping roller - keep safety distance!

Be careful with trailing machine parts. Wait for work on these until they stop completely!

There are crushing and shearing points on driven parts!

Driving behavior, steering and, if applicable, braking capability and tilting behavior are influenced by
mounted or attached implements and load. For this reason, only implements approved by the
manufacturer may be used. The working speed must be adapted to the respective conditions.

Unauthorized conversions that endanger the operational safety of the machine are prohibited!

Check the machine for operational safety before each use!

Never remove or change protective devices!

Never go under the unsecured device for repair or inspection!

Содержание KM 10037 H-FKDR























Отзывы: