Kersten KM 10037 H-FKDR, Оригинальная инструкция по эксплуатации

Страница: 16 / 22

15
Operation
8 Operation
8.1 Operating instructions - Sweeper
•
Adjust the two support wheels by means of the twist grips in such a way that the roller
brushes one about 4 cm wide strip on the ground depressed.
•
Pay attention to the same setting of the two support wheels according to the marking on the
scale graduation!
Note: A sweeping roller set too tight will not produce better sweeping results.
Attention: Never store the sweeper on the broom.
Fig. 6
•
After disengaging the sweeper, the hydraulic hoses must be put in circulation.
8.2
Tray Settings
•
Use the swivel handles on the two guide rails to collect the collection container
to an even ground distance of 4 cm - pay attention to scale graduation!
Attention! Never sweep sweeper with filled container!
8.3
Side brush adjustment
See assembly - side brush
View in direction of travel left
4cm
Bearing shell
4cm
Stabilize
Height scale
Clippings
lock
Open, hang up
Guide rail Rotary handle