Kersten KM 10037 H-FKDR, Оригинальная инструкция по эксплуатации

Страница: 15 / 22

KM 10037; 11537 12537 H-FKDR
14
7.5 Mounting water blasting device
•
When using the sweeper without collecting container, the water nozzles are mounted on top
of the sweeper roof.
•
When used with front hopper bottom, as shown in the figure 5 sketch.
•
In the case of the KM10037 H-FKDR and KM11537 H-FKDR, only one water nozzle can be
mounted in the center, or two water nozzles at a distance of approx. 500 mm from each other.
in each 250 mm distance to the center of the sweeper roof or the collecting container. With
the KM12537 H-FKDR, two water nozzles are mounted at a distance of 625 mm from each
other.
•
For each water nozzle holding plate, two bores with a diameter of 8.5 mm each and at a
distance of 30 mm from each other must be made on the sweeper roof or the collecting tank.
•
At the same time, the kink of the retaining plates should rest flush against the bottom edge of
the edge. Each mounting plate is mounted with 2 M8 x 16 mm screws, spring washers and
nuts,
•
(see Fig. 5).
with collection container and without collection container
Fig. 5
30mm
500mm or 625 mm
40mm