Kersten KM 10037 H-FKDR, Оригинальная инструкция по эксплуатации

Страница: 17 / 22

16
Maintenance
9 Maintenance
9.1 General
Attention!
Personal injury or damage to the machine may occur. Before using the machine, check
all safety-related parts and hydraulic connections.
9.2
Maintenance
●
The sweeper must be subjected to regular maintenance.
●
After carrying out the work, all dismantled safety devices must be removed be properly installed
again.
●
After the first 5 hours of operation, check all bolts and bolts
●
Bolt connections and the tension rod of the sweeping roller.
●
Lubricate or lubricate all moving parts.
●
Check the hydraulic connections for leaks before each use.
●
Check hydraulic connections for the first time after 5 operating hours, retighten if necessary!
Important NOTE:
Only tightening has no success!!!
Please unscrew a leaking hydraulic fitting first, then hose
or screw. Now the screw connection can be tightened again.
9.3
Daily test
●
Check the safety elements and moving parts before each use on wear.
●
Check the hydraulic connections and lines.
●
Perform a test run before each use.
●
Clean the device after each use.
●
Sweeping roller for storage, turn up both support wheels, until the sweeping roller is unloaded.
●
Store the side brush only in the raised position.
9.4
Maintenance after 20 or 100 operating hours or longer downtime
●
At regular intervals and always at the beginning and end of the season the moving
parts of the unit are greased or oiled.