18
Installing the sweeping roller
9.6 Installing the sweeping roller
•
In the direction of travel on the right, remove the tension rod (D) with the K-washer (E) from the
sweeper's basic housing.
•
Loosen the three nuts (A) with the respective spring ring (B) and pull out the drive stub (C) with
bearing shells.
•
Remove the drive tube (F), insert the sweeper broom [two-piece] (G) into the machine so that
the 145 mm round hole to the right points to the hydraulic motor, see Fig.7a.
•
Then reassemble the drive tube in reverse order with the drive stub and the tension rod.
Broom sweeper
two-piece
right
Hydraulic
engine left
Fig.7a
Fig.7
Содержание KM 10037 H-FKDR
Страница 2: ...1...