ALT-BA-defsi-0410
109
8.1.2 Parts counting
Before the balance can count parts, it must know the average part weight (i.e.
reference). This is either entered manually or determined by weighing. Proceed by
putting on a certain number of the parts to be counted. The balance determines the
total weight and divides it by the number of parts (the so-called reference quantity).
Counting is then carried out on the basis of the calculated average piece weight.
As a rule:
The higher the reference quantity the higher the counting accuracy.
Display overview for parts counting operation:
1. Number of all parts on the weighing plate
2. Weighing-in aid coarse/fine (only displayed for active dispensing)
3. Operating mode (status bar)
4. Reference weight
5. Weight of all parts on the weighing plate
6. Tolerance marker (only displayed for active tolerance weighing)
too light
rated value
too heavy
7. Display for parts counting operation
Operator
Indication
Ö
Call up operating mode
“M1 Parts counting“
(see chapter 8.1)
Ö
Press -key
Ö
Use the cursor (
►
) to select your setting
(01 – 07)
Parts counting setup
M1 01 Unit weight
02 Recall sample
03 Store sample
04 Checkweighting
05 Filling
06
07 Run
Statistics
5.0000 g
ON
ON
OFF
01 Unit weight – manual input of reference weight
Ö
Press the -key; the current menu item blinks.
Use the arrow keys (see chapter 7.1) to enter the
reference weight for a unit. Confirm with
-key
