manualshive.com logo in svg

KERN KERN ALT, Руководство по эксплуатации

Поделиться
Скачать
KERN KERN ALT Скачать руководство пользователя страница 6

ALT-BA-defsi-0410 

74

 

3  Fundamental information (general) 

3.1 Designated 

use 

The balance you have acquired serves to determine the weighing value of the 
material to be weighed. It is intended to be used as a “non-automatic“ balance, i.e. 
the material to be weighed is manually and carefully placed in the centre of the 
weighing plate. The weighing value can be read off after a stable weighing value has 
been obtained. 
 

3.2 Inappropriate 

use 

Do not use balance for dynamic add-on weighings, if small amounts of goods to be 
weighed are removed or added. The “stability compensation“ installed in the balance 
may result in displaying an incorrect measuring value! (Example: Slowly draining 
fluids from a container on the balance.)  
Do not leave a permanent load on the weighing plate. This can damage the 
measuring system. 
 
Be sure to avoid impact shock and overloading the balance in excess of the 
prescribed maximum load rating (max.), minus any possible tare weight that is 
already present. This could cause damage to the balance. 
Never operate the balance in hazardous locations. The series design is not 
explosion-proof. 
Structural alterations may not be made to the balance. This can lead to incorrect 
weighing results, faults concerning safety regulations as well as to destruction of the 
balance. 
The balance may only be used in compliance with the described guidelines. Varying 
areas of application/planned use must be approved by KERN in writing. 
 

3.3 Guarantee 

 
The guarantee is not valid in the following cases: 

•

  non-observation of our guidelines in the operating instructions 

•

  use outside the described applications 

•

  alteration to or opening of the device 

•

  mechanical damage and damage caused by media, liquids,  

natural wear and tear 

•

  inappropriate erection or electric installation 

•

  overloading of the measuring equipment 

 

Содержание KERN ALT



































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды