25
4.6 Interface commands
Your scale can be configured, interrogated and operated from a PC via an RS232C interface.
Preconditions
The following preconditions must be fulfilled to achieve communication between the scale
and a PC:
The scale must be connected to the RS232C interface of the PC by a suitable cable (see
Section 4.4) .
The scale interface must be set at Dialog mode (see Section 3.5).
A terminal program must be available on the PC .
The communications parameters (protocol, bits and parity, data transfer rate) must be set
at the same values in the terminal program and in the scale (see Section 3.5).
Definition of the journal header
Up to 5 lines, each with a maximum of 24 characters, can be defined and these appear at
the beginning of every journal that is printed off. The company name and address are
generally inserted into the journal. The journal header can be configured using the demo
version of the BalanceConnection version 3.0 PC software. This demo version is freely
available at www.Kern-Sohn.com
ME-Nr.: 22009663
All manuals and user guides at all-guides.com
