16
Data transfer rate
300, 600, 1200,
2400
1)
,
4800, 9600, 19200 baud
Data and formatting to be
transferred
Header (
On
1)
/Off)
6)
Gross (
On
1)
/Off)
Net (On
1)
/Off)
Tare
(
On
1)
/Off)
4 LinF (
On
1)
/Off)
F Feed (On/
Off
1)
)
Ln for (
Single
1)
/Multi)
Report heading
gross weight
net weight
tare
4 empty lines
form feed
Single
= 1 result per line
,
Multi = all results on 1 line
Reset
Resets all settings of selected
interface to factory settings.
Reset with
key (confirming
Std On query by pressing
again) or cancel with
.
End settings
Exit the interface block.
Press
to exit interface block
or
to make further settings.
bAUd
Com 1
dEFStr
Com 1
rESEt
Com 1
End IF1
Com 1
1)
Factory setting
2)
Data printout when weight changes.
3)
The Dialog mode is used for bidirectional communication of the
scale with an external device (e.g. a computer). Further informa-
tion is given in Section 4.6.
5)
If this operating mode is selected, the associated default settings
(see Remarks column) are automatically adopted.
6)
This setting specifies whether a record header is to appear on the
printouts. This consists of up to 5 lines, each with a maximum of
24 characters (e.g. company name and address). The record
header is created and formatted by means of SICS commands via
the interface (see Section 4.6). A typical record with a header is
shown opposite.
Function/Display
Settings
Remarks
All manuals and user guides at all-guides.com
all-guides.com
