1530 Old Oakland Road, Suite 100
01837-002 Rev. 3.1
San Jose, CA 95112 USA
(800) 260-5265 (408) 451-2520 FAX (408) 441-0309
Page 9 of 12
SB-293 Satellite Board
General Purpose Inputs and Outputs Configuration Connections
This configuration assumes JP12 is ON configuring the Satellite board for general purpose inputs
and outputs.
Relay Outputs Table
TB-7 / TB-10 Relay Outputs
Description
TB-7 – Pin 1
GPO 1 – normally open line
TB-7 – Pin 2
common/ground
TB-7 – Pin 3
GPO 1 – normally closed line
TB-7 – Pin 4
GPO 2 – normally open line
TB-7 – Pin 5
common/ground
TB-7 – Pin 6
GPO 2 – normally closed line
TB-10 – Pin 1
GPO 3 – normally open line
TB-10 – Pin 2
common/ground
TB-10 – Pin 3
GPO 3 – normally closed line
TB-10 – Pin 4
GPO 4 – normally open line
TB-10 – Pin 5
common/ground
TB-10 – Pin 6
GPO 4 – normally closed line
Inputs Table
TB-8 / TB-9 Inputs
Description
TB-8 – Pin 1
GPI 1
(1)
TB-8 – Pin 2
common/ground
TB-8 – Pin 3
GPI 2
(1)
TB-8 – Pin 4
GPI 3
(1)
TB-8 – Pin 5
common/ground
TB-8 – Pin 6
GPI 4
(1)
TB-9 – Pin 1
GPI 5
(1)
TB-9 – Pin 2
common/ground
TB-9 – Pin 3
GPI 6
(1)
TB-9 – Pin 4
GPI 7
(1)
TB-9 – Pin 5
common/ground
TB-9 – Pin 6
GPI 8
(1)
(1)
General Purpose inputs can accept either a normally closed or normally open signal. The type
of signal is dependent upon the type of input device. The Doors32™ software is then
programmed to accept that input.
Quick Start Guide
SB-293
