1530 Old Oakland Road, Suite 100
01837-002 Rev. 3.1
San Jose, CA 95112 USA
(800) 260-5265 (408) 451-2520 FAX (408) 441-0309
Page 4 of 12
SB-293 Satellite Board
Two Door Configuration Connections
This configuration assumes JP12 is OFF configuring the Satellite board for second door control.
Relay Outputs Table
TB-7 / TB-10 Relay Outputs
Description
TB-7 – Pin 1
lock output – normally open line
TB-7 – Pin 2
common/ground
TB-7 – Pin 3
lock output – normally closed line
TB-7 – Pin 4
alarm output – normally open line
TB-7 – Pin 5
common/ground
TB-7 – Pin 6
alarm output – normally closed line
TB-10 – Pin 1
GPO 3/DHO-B – normally open line
TB-10 – Pin 2
common/ground
TB-10 – Pin 3
GPO 3/DHO-B – normally closed line
TB-10 – Pin 4
GPO 4/DHO-A – normally open line
TB-10 – Pin 5
common/ground
TB-10 – Pin 6
GPO 4/DHO-A – normally closed line
Inputs Table
TB-8 / TB-9 Inputs
Description
TB-8 – Pin 1
door status switch input – normally closed
TB-8 – Pin 2
common/ground
TB-8 – Pin 3
RTE input – normally open
TB-8 – Pin 4
GPI 3 input
(1)
/AUX RTE-B input – normally open
TB-8 – Pin 5
common/ground
TB-8 – Pin 6
GPI 4 input
(1)
TB-9 – Pin 1
GPI 5 input
(1)
TB-9 – Pin 2
common/ground
TB-9 – Pin 3
GPI 6 input
(1)
TB-9 – Pin 4
GPI 7 input
(1)
TB-9 – Pin 5
common/ground
TB-9 – Pin 6
GPI 8 input
(1)
(1)
General Purpose inputs can accept either a normally closed or normally open signal. The type
of signal is dependent upon the type of input device. The Doors32™ software is then
programmed to accept that input.
Door Status Switch Input
A door status switch opens and closes as the door is opened and closed.
NOTE: If a door switch is not installed, a jumper must be installed across pins 1 and 2 of TB8 to
prevent a continuous door open alarm from being reported by the controller.
Quick Start Guide
SB-293
TB8
1
2
3
4
5
6
Ground/Common
Signal
Ground/Common to TB-8, Pin 2
Signal to TB-8, Pin 1
Normally Closed
Input Device
