28
LEVELtrol-II Installation & Operating Instructions
Sub-menus
Display
Notes
6.4.10
SETUP PROCESS
INPUTS
(Level)
SETUP PROCESS INPUTS
SETUP PROCESS INPUTS
Level
Compen/Input
LEVEL SENSOR TYPE
delta_P Level
LEVEL SIG. RESPONSE
Level Distance
LEVEL INPUT SIGNAL
Voltage Current
INPUT SIGNAL RANGE
0-10V 0-5V 1-5V
INPUT SIGNAL RANGE
4-20mA 0-20mA
LEVEL LOW SCALE
####### lb/in2
LEVEL FULL SCALE
####### lb/in2
AVERAGING CONSTANT
#######
Advance To
SETUP PROCESS INPUTS
(Compen/Input)
Press ENTER to begin setup of Process
Inputs.
Press ENTER when Level is flashing to
configure the Level Input.
Press ENTER when desired level sensor type
is flashing.
If LEVEL selected above;
Select Level if sensor signal follows fluid level.
Select Distance if sensor signal follows the
distance from the sensor to the fluid.
Choose Analog Signal Type.
If Voltage selected,
Choose desired Voltage Range.
If Current selected,
Choose desired Current Range.
Enter the value corresponding to the low
analog signa of transmitter.
Enter the High value corresponding to the
High analog signal of transmitter.
Enter the desired averaging value needed to
dampen display.
