20
LEVELtrol-II Installation & Operating Instructions
SELECT OPERATE STATE
Run
Setup
Test
DO EZ SETUP?
No
Yes
ARE YOU SURE?
No
Yes
INSTRUMENT TYPE
Level/Tot Batch
COMPENSATION EQ.
Volume Mass Cor/Vol
VOLUME UNIT LABEL
gal
LEVEL UNIT LABEL
in
TANK SHAPE
TBL. VERT HORZ SPHR
STRAPPING TABLE
LEV01:0.0 in
STRAPPING TABLE
VOL01:0.0 gal
VOLUME CONV. FACTOR
231.0 in3/g
TANK DIAMETER
100 in
Continued on next page.
6.2.1
TOP LEVEL
SETUP MENU
Menus
Display
Notes
Select Setup to enter the instrument
setup routine.
Select YES to enter EZ Setup routine.
Confirm that you want to run EZ
Setup. Caution: Any previous program
settings may be lost or reset.
Instrument Type.
Select the desired compensation
equation.
Enter the desired volume units label.
Enter the desired level units label.
Select the appropriate tank shape.
If TBL selected, Enter the desired Level
for the appropriate point of the table .
Enter the desired Level for the
appropriate point of the table .
Enter the volume units conversion
factor needed by the unit.
Enter the tank diameter.
6.2.2
EZ Setup
Submenu
Groups
6.2 EZ Setup
The EZ Setup routine is a quick and easy way to configure the unit for the
most commonly used instrument functions. This setup assumes that you are
measuring level using a 4-20 mA transmitter. Entering the EZ Setup mode
automatically sets many features. This may cause any previously programmed
information to be lost or reset. For a complete customized configuration, see
sections 6.3 and 6.4.
