34
LEVELtrol-II Installation & Operating Instructions
Sub-menus
Display
Notes
6.4.18
SETUP CONTROL
INPUTS
(LEVEL/TOTAL)
Press ENTER to begin the Control Input
setup.
Select the desired Control Input for setup.
Control Inputs 1, 2 & 3 can be set for Print,
Ack, or Keylock
ACK (acknowledge) will acknowledge and
clear alarms and warning messages.
Note: Alarms may reassert themselves if
alarm conditions are still present.
PRINT is used to initiate print.
KEYLOCK will lockout menus if held at a
voltage greater than 3V.
Select the desired Control Input for setup.
If Control Input 1 Selected,
Select Start or Reset/Start
If Control Input 2 Selected,
Select Stop or Stop/Reset.
If Control Input 3 Selected,
Select Reset, Print, Keylock or
Ack (acknowledge).
Select Time to set the time.
Select 24Hr or 12Hr clock
If 12Hr Clock,
Enter AM or PM
Enter time of day.
SETUP CONTROL INPUTS
SETUP CONTROL INPUTS
Input1 Input2 Input3
CONTROL INPUT1 USAGE
PRINT ACK KEYLOCK
CONTROL INPUT2 USAGE
PRINT ACK KEYLOCK
CONTROL INPUT3 USAGE
PRINT ACK KEYLOCK
Advance To
SETUP REALTIME CLOCK
SETUP CONTROL INPUTS
Input1 Input2 Input3
CONTROL INPUT1 USAGE
START RESET/START
CONTROL INPUT2 USAGE
STOP STOP/RESET
CONTROL INPUT3 USAGE
RST PRN KEYLOCK ACK
Advance To
SETUP REALTIME CLOCK
SETUP REALTIME CLOCK
Time
Date
CLOCK TYPE
24HR 12HR
SELECT CLOCK AM/PM
AM PM
TIME OF DAY HH:MM:SS
##:##:##
Advance To
SETUP REALTIME CLOCK
(Date)
6.4.20
SETUP REALTIME
CLOCK
(Time)
6.4.19
SETUP CONTROL
INPUTS
(BATCH)
