Kenwood TK-5310, Руководство по обслуживанию, Страница: 7 / 97

TK-5310
7
Item
Zone-Channel RX Frequency TX Frequency Channel Type TX Mode Channel Spacing RX Signaling TX Signaling
Key
[A] Go to the next item
[B]
Zone /Channel 5kHz/6.25kHz/1MHz
Unused
QT/DQT(N)/DQT(I)/OFF
switching step switching switching
[C]
Zone /Channel
1 step down
ANALOG/P25/MIXED ANALOG/P25 Channel spacing
Signaling down
down switching(Back) switching(Back) switching(Back)
[D]
Zone /Channel
1 step up
ANALOG/P25/MIXED ANALOG/P25 Channel spacing
Signaling up
up switching(Forward) switching(Forward) switching(Forward)
[Side3]
Data
Unused
ON/OFF
Unused
1 step/Standard
writing switching switching
Keypad
[0]~[9]
Unused Go to the direct enter mode Unused
Go to the direct enter mode
(K3 and K6 (After selecting signaling type)
models only)
Key operation
Item
RX NAC TX NAC TG List No.
Key
[A] Go to the next item
[B]
Delete the least digit from the current number
Unused
(Press and hold to delete all numbers.)
[C] Unused
TG List
number down
[D] Determine the least digit
TG List
number up
[Side2] Increment a number in the specified digit Unused
[Side3] Decrement a number in the specified digit Unused
Keypad Add a digit to the current number
(K3 and K6 How to enter the “A” ~ “F” is follows.
Unused
models only) A : Press [2] with PTT B : Press [5] with PTT C : Press [8] with PTT
D : Press [0] with PTT E : Press [#] with PTT F : Press [*] with PTT
REALIGNMENT
• Direct enter mode
Item
RX Frequency TX Frequency RX Signaling TX Signaling
Key
[A] Return to non-direct enter mode
[B] Unused
Change the type of signaling and
return to non-direct enter mode
[C] Unused
[D]
Delete the least digit from the current number
(Press and hold to delete all numbers.)
[Side3] ON/OFF switching at TX Frequency Unused
Keypad
Add a digit to the current number
[0] ~ [9]
Keypad
Return to non-direct enter mode
[*]
Keypad Delete the least digit from the current number
[#] (Press and hold to delete all numbers.)