2
S
cAn
p
rogrAmming
(k2/k3/k5/k6/k7
modelS
only
)
<tk-5210/ tk-5310
only
>
Note:
Scan programming is only available when using
Conventional operation.
■
Conventional Operation
If Scan Type has been programmed for Conventional
operation, you are able to reprogram your scan list.
1
Press the key programmed as
Scan Program
.
• The
icon appears on the display and blinks.
2
Press the
Side 2
and
Side 3
keys to select the zone or
channel you will add to or remove from the scan list.
• The
icon appears on the display for zones/ channels
that are added to the scan list.
• Press the
A
key to toggle between Zone Select and
Channel Select.
3
Press the
<C
key to add the selected zone or channel to
the scan list or the
B
key to remove the selected zone
or channel from the scan list.
• The
icon appears on the display when a zone/ channel
is added to the scan list, and disappears when a zone/
channel is removed from the scan list.
4
Press the
Side 1
key to exit scan programming.
If the Priority channel has been set as Operator Selectable
by your dealer, you are also able to reprogram the Priority
mode.
1
Press the key programmed as
Scan Program
.
• The
icon appears on the display and blinks.
2
Press and hold the
A
key for 2 seconds to edit the
Priority channel.
3
Press the
Side 2
and
Side 3
keys to select the channel
you will set as the Priority channel.