![background image](http://html.mh-extra.com/html/kenwood/tk-5210/tk-5210_instruction-manual_191517049.webp)
3
SIGNALING
Note:
Signaling can be used only in Conventional FM Operation.
Q
uiet
t
Alk
(Qt)/ d
igitAl
Q
uiet
t
Alk
(dQt)
Your dealer may have programmed QT or DQT signaling on
your transceiver channels. A QT tone/ DQT code is a
sub-audible tone/code which allows you to ignore (not hear)
calls from other parties who are using the same channel.
When a channel is set up with a QT tone or DQT code, squelch
will only open when a call containing a matching tone or code is
received. Likewise, signals that you transmit will only be heard
by parties whose QT/ DQT signaling matches your transceiver.
If a call containing a different tone or code is made on the
same channel you are using, squelch will not open and you will
not hear the call. This allows you to ignore (not hear) these
calls. Although it may seem like you have your own private
channel while using QT/ DQT, other parties can still hear your
calls if they set up their transceiver with the same tone or code.
■
Operator Selectable Tone (OST) (K2/K3/K5/K6/K7 models only)
If a key has been programmed with
Operator Selectable
Tone
, you can reprogram the QT tone or DQT code on
each of your channels.
1
Select your desired channel.
2
Press and hold the key programmed as
Operator
Selectable Tone
for second.
• The icon appears on the display.
3
Press the
Side 2
and
Side 3
keys or the
D>
and
<C
keys to select your desired tone or code from to 0.
4
Press the
Side 1
key to save your new setting.
After selecting and setting up your desired tone or code,
press the
Operator Selectable Tone
key to activate the OST
function. Press this key again to turn the OST function OFF.