38
S
electing
the
e
ncryption
k
ey
1
Press the key programmed as
Scrambler/ Encryption
Code
(K2/K3/K/K/K7 models only)
or press and hold the
key programmed as
Scrambler/ Encryption
for second,
to enter Key Selection Mode.
2
Select the new Encryption
key using the
Side 2
and
Side 3
keys or the
<C
and
D>
keys.
• There are available Encryption keys ( ~ ).
• When a call is received, the transceiver will descramble the call
as long as the received code is in the encryption list.
3
Press the
Side 1
key to set the new Encryption key.
Note:
To return the transceiver to the default Encryption key
programmed, select “PRESET”. However, if you delete the
Encryption key (see below), it will not be recovered.
d
eleting
the
e
ncryption
k
ey
(k2/k3/k5/k6/k7
modelS
only
)
1
Press the key programmed as
Key Delete
to enter Key
Delete mode.
2
Select the current Encryption key using the
Side 2
and
Side 3
keys or the
<C
and
D>
keys.
3
Press the
B
key to delete the Encryption key.
4
Press the
Side 1
key to exit Key Delete mode.
Note:
To delete all Encryption keys (when more than one key has
been set up), select “ALL”.
p
ASSword
p
rotection
(k2/k3/k5/k6/k7
modelS
only
)
If the transceiver is password protected, entering an incorrect
password successively times will automatically delete all the
Encryption keys.
• Turning the transceiver power OFF and the ON again will not reset
the number of attempts for entering an incorrect password.