47
TROUBLESHOOTING GUIDE
Problem
Solution
Cannot turn the
transceiver power
ON.
• The battery pack may be dead. Recharge or
replace the battery pack.
• The battery pack may not be installed
correctly. Remove the battery pack and
install it again.
Battery power
dies shortly after
charging.
• The battery pack life is fi nished. Replace
the battery pack with a new one.
Cannot talk to
or hear other
members in your
group.
• Make sure you are using the same
frequency and QT/DQT setting as the other
group members.
• Other group members may be using Privacy
Talk. Turn on your transceiver’s Privacy Talk.
• Other group members may be too far away.
Make sure you are within range of the other
transceivers.
Other voices
(besides group
members) are
present on the
channel.
• Change the QT/DQT settings. Make sure
all group members change the settings on
their transceivers to match the new QT/DQT
setting.
You cannot make a
selcall.
• Verify and set your transceiver ID (Own,
Group, All).
You cannot receive
calls except
selcalls.
You cannot transmit
even by pressing
the PTT switch.
• Optional Signaling is set to "FS (FleetSync)".
Change the setting to "oF (OFF)".
The transceiver
is malfunctioning
for no apparent
reason.
• Reset the transceiver as described on page
46.
