38
Data Transmit Modulation Delay Time
This function normally operates fi ne using the default setting,
so it is not necessary to adjust the value. However, there are
certain operating environments that will not allow the use of
FleetSync (Selcall) functions, such as Scan mode. When you
encounter such an environment, readjust the delay time to a
longer time by following the procedures.
To set up a data transmit modulation delay time:
1
Enter the Setting Mode {page 24}.
2
Press the
or
key to select “ ”.
3
Press the
MENU
key then press
or
to select “
” (0 ms), “
” (500 ms),
“
” (1000 ms), “
” (1500 ms), or “
” (2000 ms).
PTT ID
The transceiver can send a PTT ID signal when pressing the
PTT
switch (beginning of transmission) or when pressing and
releasing (beginning of transmission and end of transmission)
the
PTT
switch.
1
Enter the Setting Mode {page 24}.
2
Press the
or
key to select “ ”.
3
Press the
MENU
key then press
or
to select “
” (PTT ID is off), “
”
(send your own PTT ID at the beginning of
transmission), or “
” to “
” (send
selected list ID number PTT ID at the
beginning and end of transmission).
Note:
◆
Transceiver's individual ID number is not available for selection as
PTT ID.
