42
BATTERY SAVER
This transceiver has been designed to give you the most out of
your battery power. The battery saver function decreases the
amount of power used when a signal is not being received and
no operations are being performed.
While using the transceiver, battery saver will automatically
switch ON after 5 seconds have elapsed with no operations or
received calls. Operating the transceiver or receiving a call will
switch this feature OFF until 5 seconds of non-operation occurs
again.
To turn this function on or off:
1
Enter the Setting Mode {page 24}.
2
Press the
or
key to select “ ”.
3
Press the
MENU
key then press
or
to
select “
” (battery saver on) or “
”
(battery saver off).
Note:
◆
While the Battery Saver is operating, the LED may fl ash green when
receiving a QT/DQT signal which does not match the QT/DQT tone/
code set up in your transceiver.
