Kenwood TH-D72A, Руководство по обслуживанию

Страница: 41 / 97

TH-D72A/D72E
41
RTC table (Compensation table)
OSC Freq. (Hz)
RTC adjust value
Lower Upper
32766.800 32766.899 115
32766.900 32766.999 116
32767.000 32767.099 117
32767.100 32767.199 118
32767.200 32767.299 119
32767.300 32767.399 120
32767.400 32767.499 121
32767.500 32767.599 122
32767.600 32767.699 123
32767.700 32767.799 124
32767.800 32767.899 125
32767.900 32767.999 126
32768.000 32768.099 127
32768.100 32768.199 0
32768.200 32768.299 1
32768.300 32768.399 2
32768.400 32768.499 3
32768.500 32768.599 4
32768.600 32768.699 5
32768.700 32768.799 6
32768.800 32768.899 7
32768.900 32768.999 8
32769.000 32769.099 9
32769.100 32769.199 10
• E. Transmission Frequency
1) Display the “FREQ B” item.
2) Press [
S
], [
T
] key and turn the encoder to the “adjust-
ment value”.
3) Press [
X
OK] key to set the “adjustment value” in the
EEPROM.
8 2
8 2 1
EEPROM setting
adjustment value
Q E R F B B
1
• F. APC
1) Display the “7.4V VHF” item.
2) Set power supply voltage to 7.4V from Battery Terminal.
3) Set display frequency and transmission power after
press key at “7.4V VHF” item.
4) While press [PTT], press [
S
], [
T
] key and turn the en-
coder during transmission to increase or decrease trans-
mission power and change the “adjustment value”.
5) Press [
X
OK] key to set the “adjustment value” in the
EEPROM.
6) Set item the display to “HI”, “LO” and “EL” and adjust
transmission power.
7) Display the “7.4V UHF” item.
8) Set power supply voltage to 7.4V from Battery Terminal
and perform steps 3 to 6 above.
9) Display the “13.8 VHF” item.
10) Set power supply to 13.8V and perform steps 3 to 6
above.
11) Display the “13.8 UHF” item.
12) Set power supply to 13.8V and perform steps 3 to 6
above.
V 4 . 7
5 7
5 7 1
EEPROM setting
adjustment value
Power Frequency adjustment point
V
e n C C W I H
VH
t
F
1
• G. MAX deviation
1) Display the “MAX DEV” item.
2) Select display frequency point after press [
X
OK] key at
“MAX DEV” item.
3) While press [PTT], press [
S
], [
T
] key and turn the en-
coder during transmission to change the “adjustment
value”.
4) Press [
X
OK] key to set the “adjustment value” in the
EEPROM.
5) Set item the display to “VHF Cent”, “VHF Lo”, “VHF
Hi”, “UHF Cent”, “UHF Lo” and “UHF Hi” and adjust all
frequency adjustment points.
D X A M
1 8
1 8 1
EEPROM setting
adjustment value
Frequency adjustment point
D
e n C C F H V
E V
t
W
• H. Balance 1
1) Display the “BAL1” item.
2) Select display frequency point after press [
X
OK] key at
“BAL1” item.
3) While press [PTT], press [
S
], [
T
] key and turn the en-
coder during transmission to change the “adjustment
value”.
4) Press [
X
OK] key to set the “adjustment value” in the
EEPROM.
5) Set item the display to “VHF Cent”, “VHF Lo”, “VHF
Hi”, “UHF Cent”, “UHF Lo” and “UHF Hi” and adjust all
frequency adjustment points.
1 L A B
5 9
5 9 1
EEPROM setting
adjustment value
Frequency adjustment point
D
e n C C F H V
E V
t
W
ADJUSTMENT