Kenwood NX-5700HB, Руководство по обслуживанию

Страница: 8 / 106

1-8 (No.RA073<Rev.001>)
 Key operation (1/3)
*3 : Mixed Mode only
*4 : [1] = "Analog", [2] = "NXDN" or "P25", [3] = "Mixed"
*5 : [1] = "Analog", [2] = "NXDN" or "P25":
*6 : [1] = "12.5kHz", [2] = "25kHz" for Analog or "6.25kHz" for NXDN
No. Setup item Display Remarks
1 RX Frequency RX Frequency Receive Frequency
2 TX Frequency TX Frequency Transmit Frequency
3 Channel Type Channel Type NXDN:
Analog/NXDN/Mixed
P25:
Analog/P25/Mixed
4 Channel
Spacing
Channel Space Analog:
12.5kHz/25kHz
NXDN:
6.25kHz/12.5kHz
P25: 12.5kHz
5 Transmit Mode Transmit Mode NXDN: Analog/NXDN
P25: Analog/P25
6 RX Signaling RX QT/DQT Receive QT/DQT
7 TX Signaling TX QT/DQT Transmit QT/DQT
8 RX RAN RX RAN None, 1~63
9 TX RAN TX RAN None, 1~63
10 RX NAC RX NAC 000~FFF
(Hexadecimal)
Note: “F7F” cannot set.
11 TX NAC TX NAC 000~FFF
(Hexadecimal)
Note: “F7E” and “F7F”
cannot set.
12 Talkgroup ID
List Number
Talkgroup None, 1~1500
13 Transmit Power Transmit
Power
Low/Medium/High
14 Channel Name Channel Name
No. Setup item Display Remarks
Key
\Item
Zone
Select
Channel
Select
RX
Frequency
TX
Frequency
Channel
Type
Transmit
Mode *3
Channel
Spacing RX Signaling
[ ] Decision Decision Decision Decision Decision Decision Decision Decision
[ ] Unused Back to the
previous item Back to the
previous item Back to the
previous item Back to the
previous item Back to the
previous item Back to the
previous item Back to the
previous item
[ ] Unused Unused Unused TX Frequency
OFF Unused Unused Unused Unused
[ ] Exit panel
program
mode Exit panel
program
mode Exit panel
program
mode Exit panel
program
mode Exit panel
program
mode Exit panel
program
mode Exit panel
program mode Exit panel
program
mode
[

] Zone
change Channel
change Frequency up Frequency up Channel type
change
Transmit
Mode change Channel
spacing
change Signaling
number
change
[

] Zone
change Channel
change Frequency
down Frequency
down Channel type
change Transmit
Mode change Channel
spacing
change Signaling
number
change
[

] Unused Unused Frequency
step change Frequency
step change Unused Unused Unused Signaling type
change
[

] Unused Unused Frequency
step change Frequency
step change Unused Unused Unused Signaling type
change
MIC
Keypad
[0] ~ [9] Zone
number
select Channel
number select Entry a Frequency directly Channel type
select ([1], [2]
or [3])
*4
Transmit
Mode select
([1] or [2])
*5
Channel
spacing
select ([1] or
[2])
*6
Entry a
Frequency
directly
MIC
Keypad [*] Decision Decision Decision Decision Decision Decision Decision Decision
MIC
Keypad [#] Unused Back to the
previous item Back to the
previous item Back to the
previous item Back to the
previous item Back to the
previous item Back to the
previous item Back to the
previous item