Kenwood NX-5700HB, Руководство по обслуживанию

Страница: 14 / 106

1-14 (No.RA073<Rev.001>)
2.3.1.2 Connecting procedure of the REMOTE CONTROL
CABLE for Dual Head system
(The procedure for connecting the KCT-71 to the radio and the
procedure for connecting the KCT-77 to the radio are the same.)
(1) Cut the waterproof packing of the KCT-71 along the dotted
line with a cutting tool so as to make the hole for the
passage of another KCT-71 connector wire.
(2) Push out the connector from the hole of another KCT-71
waterproof packing.
(3) Combine the modified KCT-71 of step (1) and KCT-71 of
step (2).
Plug the connector of the KCT-71 of step (2) into the hole
of the KCT-71 waterproof packing of step (1).
(4) Insert each of the 2 connectors of the KCT-71 made in step
(3) into the connectors of the radio.
(5) Fit the waterproof packing to the chassis, then press it in
the direction of the arrow and flatten its surface.
(6) Form the cable of the modified KCT-71 so as not to
protrude from the groove of the chassis as shown below.
Waterproof packing Cut point
DIP switch
Waterproof packing