Kenwood NX-5700HB, Руководство по обслуживанию

Страница: 34 / 106

1-34 (No.RA073<Rev.001>)
(6) The Main unit and the Interface unit are connected by FFC.
When removing the Main unit, be careful not to apply
excessive force to the FFC and the connectors.
3.1.3 Removing the MOLDING COVER
Because the MOLDING COVER is fixed on the chassis with
double-sided tape, remove it by the following procedure.
Insert a flat-head screwdriver into the gap of MOLDING COVER
<1>, then twist it in the direction of the arrow <2> and remove it.
3.2 Precautions for Reassembly
3.2.1 Wire forming
Refer to the following pictures.
Interface unit
Main unit
FFC
<1>
<2>
MOLDING COVER
Double-sided tape
BLS
(Board Level Shield)
BT/GPS unit
Avoid the capacitor
Pass the wire of COAXIAL RECEPTACLE-SMA
through the underside of the FFC.