NX-200
3
SYSTEM SET-UP
Are you using the optional antenna?
Are you using the speaker microphone?
YES
KRA-22 or KRA-26
Optional antenna
NO
NO
(Option)
(Option)
YES
KMC-25/KMC-41/KMC-42W
Speaker microphone
or
KMC-38GPS
GPS speaker microphone
Are you using the voice guide & storage unit?
NO
(Option)
See page 7.
YES
VGS-1
Delivery
Merchandise received
License and frequency allocated by FCC
Choose the type of transceiver
Transceiver programming
A personal computer, programming interface (KPG-36/36A),
USB adapter(KCT-53U), and programming software (KPG-111D)
are required for programming.
(The frequency, and signaling data are programmed for the transceiver.)
Frequency range (MHz)
RF power
Type
DTMF keypad
TX/RX 136~174
5W
NX-200 K
No
Yes
TX/RX 136~174
5W
NX-200 K2
REALIGNMENT
1. Modes
User mode
Panel test mode
Firmware version information
Panel tuning mode
Data programming mode
PC test mode
PC tuning mode
PC mode
Clone mode
Firmware
programming mode
Mode
Function
User mode
For normal use.
Panel test mode
Used by the dealer to check the fundamen-
tal characteristics.
Panel tuning mode
Used by the dealer to tune the transceiver.
PC mode
Used for communication between the trans-
ceiver and PC.
Data programming
mode
Used to read and write frequency data and
other features to and from the transceiver.
PC test mode
Used to check the transceiver using the PC.
This feature is included in the FPU.
See pages 45 to 57.
Firmware program-
ming mode
Used when changing the main program of
the fl ash memory.
Clone mode
Used to transfer programming data from
one transceiver to another.
Firmware version
information
Used to confi rm the internal fi rmware ver-
sion.