NX-200
10
DISASSEMBLY FOR REPAIR
■
Changing the channel selector from 16-channel
operation to free
1. Remove the channel selector knob.
2. Remove the circular nut.
3. Remove the mechanical stopper.
4. Reassemble the circular nut and channel selector knob
that were removed in steps 1 and 2, in their original posi-
tions.
Channel selector knob
(K29-9408-13)
Circular nut
(N14-0844-04)
Mechanical stopper
(D32-0446-14)
■
Assembly information (Sheet/Cushion)
When “Main Parts” is changed (ordered), “Assembled
Sheet/Cushion” should also be changed (ordered) to-
gether.
The Sticker and Sheet etc are non-reusable parts. It re-
quires the new one to get the radio’s performance after
repairs.
For example, when “Plastic Cabinet (A02-4002-23 (6-
key)/A02-4003-23 (18-key))” is changed, “Sticker (B42-
7296-04)”, “Badge (B43-1606-04)” and “Fibrous Sheet
(G10-1373-04)” should be ordered and changed together
because Sticker (B42-7296-04), Badge (B43-1606-04) and
Fibrous Sheet (G10-1373-04) are non-reusable.
Main Parts
Assembled Sheet/ Cushion
Part Name
Part Number
Part Name
Part Number
Remark
Plastic Cabinet (6-key)
A02-4002-23
Sticker
B42-7296-04
“NXDN” is printed.
Badge
B43-1606-04
“KENWOOD” is printed.
Plastic Cabinet (18-key)
A02-4003-23
Fibrous Sheet (SP)
G10-1373-04
LCD ASSY
B38-0923-05
Adhesive Sheet (LCD)
J99-0714-04
Used for fi xing the LCD ASSY on the Illumination Guide
(LCD).
Also used for fi xing the Illumination Guide (LCD) on the
Control Unit.
Cord ASSY (50-pin FPC)
X42-3340-10
Cushion (50-pin FPC)
G13-2258-04
Speaker
T07-0755-15
Rubber Cushion (SP)
G11-4272-14
Sheet (SP)
G11-4458-14
Used for stabilizing the waterproof performance.
“•” (a hole) on the Sheet (SP) shows the upper side (6-key
FPC side).
Switch Unit (6-key FPC)
X41-3720-10
Adhesive Sheet
(6-key FPC)
J99-0390-04
Used for fi xing the Switch Unit (6-key FPC) from the back
side of the Holder (FG-SP) before soldering.
Adhesive Sheet
(6-key FPC)
J99-0712-14
Used for fi xing the Switch Unit (6-key FPC) on the Holder
(FG-SP).
Switch Unit (PTT FPC)
X41-3710-10
Sheet (PTT)
G11-4428-04
Used for fi xing the Push Knob (PTT) on the Switch Unit (PTT
FPC) and stabilizing the waterproof performance.
Adhesive Sheet
(PTT FPC)
J99-0711-04
Used for fi xing the Switch Unit (PTT FPC) on the Chassis.
Chassis
A10-4111-21
Relay Hardware
(VCO-Chassis)
E29-1221-14
Used for stabilizing the shield performance of the VCO.
Sheet (Air)
G11-4331-04
This sheet is put on the leak check hole.
This sheet lets air through, but does not let water through.
Rubber Sheet (FET)
G11-4429-04
Used for stabilizing the radiation performance of the FET.
Sheet (Air)
G11-4440-04
This sheet is a protect cover of the sheet (G11-4331-04).
Cushion (ANT)
G13-2220-04
Used for fi xing the Terminal ASSY.
Terminal Block
E72-0425-03
Adhesive Sheet
(Terminal Block)
J99-0725-04
Used for fi xing the Terminal Block and the Packing (Terminal
Block).