![Kenwood NEXEDGE NXR-810 Скачать руководство пользователя страница 15](http://html.mh-extra.com/html/kenwood/nexedge-nxr-810/nexedge-nxr-810_service-manual_192292015.webp)
NXR-810
15
2-2. Connection
1. Solder the prepared coaxial cable to the Final unit (A/3).
2. Connect the pin connector of the coaxial cable to CN101
of the TX-RX unit.
2-2. 连接
1. 将准备好的同轴电缆焊接到末级单元 (A/3)。
2. 将同轴电缆的针脚连接器连接到 TX-RX 单元的 CN101。
Final unit (A/3)
Component side
末级单元(A/3)
元件面
CN801
CN101
Solder the coaxial
cable.
CN204
GND
RX
焊接同轴电缆。
TX-RX unit /
TX-RX单元
Component side /
元件面
Route the coaxial cable
under the lead wire extend-
ing from CN204 and CN801.
将同轴电缆布置在从CN204和
CN801伸出的导线下面。
Style the coaxial cable as illustrated in the figure.
使同轴电缆的样式如图中所示。
2-3. Setting the FPU
Set the channel to be used as “Simplex” using the FPU.
Check and readjust the transmit power if needed.
3-3. 设置 FPU
使用 FPU,将信道设置为用作“单工”
。
如有必要,请检查或重新调整发射功率。
MODIFICATION /
改装