Kenwood MDX-G3, Инструкция по эксплуатации

Страница: 38 / 72

38
EN
Main unit only
1
Make preparation for recording.
See steps
1
and
3
to
5
of "Recording
CD onto TAPE" (pages 22 & 23).
2
Select the source to be recorded.
CD : Press the CD
6
key.
MD : Press the MD
6
key.
Radio : Press the TUNER FM/AM key.
AUX component : Press the AUX key.
If a CD or MD has already been loaded
in advance, it starts to be played auto-
matically now. press the
7
STOP key
to stop it.
3
When the source to be recorded
is ready, press the TAPE REC key.
Recording onto TAPE
The tape deck of the system can record any
music source including CD and radio.
Tape recording indicator
4
Start playing the source to be re-
corded.
To stop recording :
Press the
7
STOP key.
To let recording pause :
When the TAPE REC key is pressed during
recording, recording pauses after leaving a
no-sound section of 4 seconds. To resume
recording from record-pause mode, press
the TAPE REC key again.
Tip for recording CD or MD onto
tape
When the cassette deck is put to record-
pause mode, the start of tape recording can
be started in synchronism with the start of
playback of the CD or MD source. (Sync re-
cording)
(1) Put the CD player or MD recorder of
the system to pause (play-pause)
mode.
(2) Select the track to be recorded first
by pressing the
4
or
¢
key.
The CD player or MD recorder enters
pause (play-pause) mode at the be-
ginning of the selected track.
(3) Press the TAPE REC key twice. The
cassette deck enters record-pause
mode after leaving a no-sound sec-
tion of 4 seconds.
(4) Start playback of the CD or MD.
÷
The cassette deck of the system is capable
of recording only the normal (TYPE I) tapes.
High (TYPE II) and metal (TYPE IV) position
tapes cannot be used.
APE T
7
STOP
AUX
4 4
TAPE REC SET
VOLUME /
MULTI-CONTROL
MENU
TUNER FM /AM
CD
6
23
TAPE
6
MD
STEREO
EX. BASS
C D
Example : Recording CD onto TAPE