59
EN
Application
section
Timer
7
Execution
7
Press the TIMER key on the re-
mote repeatedly until the pro-
gram number to be executed
("PROG.
1
" or "PROG.
2
" or
"PROG.
12
") is lit.
8
Press the POWER
key to
switch the power off to the
STANDBY mode.
The STANDBY/TIMER indicator lights
in green.
The program timer is activated and re-
cording will start when the set ON time
comes.
Program No. lit
To cancel program timer :
Press the TIMER key on the remote re-
peatedly until "PROG.
1
" or "PROG.
2
" or
"PROG.
12
" turns off.
To check or change the timer setting :
Restart the procedure from step
1
again.
÷
Be sure to adjust the time of the day (page 7)
before using the timer functions.
÷
PROG.1 and PROG.2 should be set so that
their operating periods do not overlap. Leave
at least 1 minute of interval between the two
programs.
÷
The speakers do not output audio during
timer recording.
÷
Even when the program timer is canceled,
previously made setting is stored in memory
and remains until new timer information is
set the next time.
÷
When the STANDBY/TIMER indicator is
blinking in green, the timer setting or clock
setting is erroneous. Check and correct them
as required (pages 7 & 58).
1
EX. BASS
T U N E R
Содержание MDX-G3
Страница 1: ...MINIDISC PERSONAL STEREO SYSTEM B60 4854 00 01 MA M 0009 MDX G3 INSTRUCTION MANUAL ...
Страница 19: ...19EN Basic section ...
Страница 25: ...25EN Basic section ...