38
Chapter Two : Setting Up the Remote Control Unit
R
emote Setup
SP Distance
Measure the distance from each speaker to the seat you most
often use. Note the distance in the table below:
2. Set the distance of the L (left front) speaker using the
or
key.
3. Press Next and set the distance of the next speaker (C =
Center) speaker.
4. Set the distances of all the speakers in the system.
R: Front Right speaker
RS: Right Surround speaker
LS: Left Surround speaker
SW: Subwoofer
5. Press the Home key (LCD function key 2) to return to
the normal operation screen.
Surround SetUp
Distance = L
9.0m/30ft
Home Next
1. In step 8 of the SP Level setting procedure above, select
Next (LCD function key 2).
Identifying Components for Remote Control Unit
After the speaker setup, it is required to make Remote Con-
trol unit capable of identifying the devices it controls. Re-
mote Control unit provided with the receiver can be used
in setup of any device. Even when a device is not listed in
the device codes in the Remote Control unit memory, the
remote control function of the device can be programmed
using the Learn function.
The Learn function can also be used to extend the remote
controllable functions.
For details, see “If a device cannot be remote controlled with
any code in the list, or to add remote control target func-
tions...” below.
Registering a device
1. Ensure that the batteries are loaded.
3. Press the Setup key (LCD function key 2).
4. Select “01. IR” using the
or
key, then press the
Enter key (LCD function key 2).
2. Press the
Menu
key (LCD function key 2).
Speaker
Left front
Center
Right front
Right surround
Left surround
Subwoofer
Distance (m or ft)
01.IR
02.Surround
03.Contrast
Home Enter
Tuner
FM 01ch
87.50MHz
Menu
Home Setup
Press the
Music
key or
Movie
key to display “Menu”.
